Mattress Care Tips
- Always carry your mattress on its side. You should not attempt to carry the mattress by yourself.
- Handles (where fitted) are only for positioning the mattress and not for lifting or carrying.
- Don’t fold your mattress under any circumstances. It will damage the edge support wire. Gently flex the mattress when going through doorways.
- Don’t remove the law tag located at the end of your mattress. This contains care and content details vital to your guarantee.
- Don’t allow anyone to jump on your mattress, abuse is not covered by this guarantee.
- Dispose of plastic bags immediately. (These bags are polyethylene and are recyclable).
- Make sure children never use these bags as playthings. They have no air vents and could cause suffocation.
Leg and castor assembly
Follow these leg and castor assembly instructions for the Foundation.
- Turn Foundation or base of bed upside down and insert pintle into hole and turn clockwise. Repeat for all legs.
- Tighten by hand until legs are firmly in place.
- Turn Foundation back over and re-tighten legs as tightly as possible by hand. Check and re-tighten where necessary every three months.
Important: It is the purchaser’s responsibility to tighten the legs and castors to ensure that the bed is set up as intended. The Guarantee is voided if this is not performed as recommended.
- Keep your mattress clean, a mattress protector is advisable.
- Keep your mattress dry. You should protect it from water and other fluids. A waterproof sheet or fitted waterproof cover under the mattress protector may be useful for children’s beds.
- When purchasing a new mattress you should consider replacing your old foundation as well. It may appear that your new mattress is sagging when the problem really lies with the old foundation providing inadequate support.
- For the better performance of your mattress, we strongly recommend the use of an appropriate Sealy Foundation which has been especially designed to work with your mattress to deliver the correct support.
Slat or platform beds
- When used on a hard unyielding platform or slats your mattress will not last as long as it would on its matching sprung foundation.
- To ensure that the slats in your furniture provide safe support ensure that the solid timber slats are spaced so that the gaps between the slats are not wider than the width of the slats themselves. These slats should be fixed to the frame to prevent movement during use. For Queen and King size, the slats must be supported by an adequate centre rail.
- It is advisable to place a layer of fabric between the slats and the underside of the mattress to protect against scuffing caused by the slats. All slats should be smooth with any sharp edges removed.
Damage caused by the slats is not covered under this guarantee.
Ongoing Sealy care
Here are the things you need to do regularly to care for your new Sealy.
- Dry cleaning chemicals can damage some of the construction materials. Refer to the care instructions on the law-tag which is sewn into the border of your mattress and base.
- Every three months you should check your bed’s legs and re-tighten if necessary.